我一直想把Garmin的GPS软件给装到支持GPS的windows Mobile的手机上。这里找到一个Garmin的XT软件和安装方法,非常简单。先给大家发出来看看。
名称:Garmin Mobile XT for Windows Mobile v.5.00.20w + Basemap + Support Files
下载:
http://www.megaupload.com/?d=EANBJQRE注意:这个只有basemap,需要自己装详细地图。具体安装方法应该是跟GPS的安装方法一样。建议用方法2,直接把已经解码的gmapsupp.img拷贝到SD卡上的Garmin文件夹下就应该可以了。
本人没有测试(GPS手机还没到手)
具体安装方法(来自readme.txt文件):
1. No installation needed. Basicly just copy folder to memory card and run the keygen to activate the application.Detailed instructions:1. Extract archive
2. Copy the "Garmin" folder to a blank memory card with at least 1.6 GB free space
3. Insert the card in your Windows Mobile device
4. Use the file explorer to browse to the "Garmin/VM" folder on the memory card
5. Run the program file for your platform, QuePPC.exe for PocketPC or QueSP.exe for Smartphone
6. Tap "Connect to Garmin GPS" then tap "Skip", confirm that you want to skip.
7. Tap to accept the safaty warning
8. Select Tools - Settings - down arrow - About
9. Take a note of your device id.
10. Quit the program and remove the memory card, connect it to your computer again.
11. Start "garmin_keygen_v1.5.exe"
12. Enter your device id and click "Generate"
13. Copy the 25 character code
14. Open the file "sw.unl" from the "Garmin" folder on your memory card with a text editor.
15. Paste the code replacing the XXXXXXXXX and save the file.
16. Repeat steps 3, 4 and 5.
17. You're all set.
This release was tested and working with a Dell Axim X50v Windows Mobile 6 and a Bluei Bluetooth GPS receiver.Application, basemap and support files were downloaded directly from Garmins website:
http://www.garmin.com/support/collection.jsp?product=010-11034-00 附:注意,如果用Cell Phone的ID产生的解码不工作的话,那在产生解码时必须进行ID转换,也就是要把Cell Phone的IMEI号码转成Garmin的10位数ID,然后再产生解码。用这个小软件来转换:
http://www.megaupload.com/?d=8DJH5MCS