二十三楼
Ci Git Romain, Dieu Ait Son Ame.
正文
导弹及相关物项和技术出口管制清单 2002/08/26
The Missiles and Missile-related Items and Technologies Export Control List 25 August 2002
一、前言
INTRODUCTION
（一）本清单第一部分是导弹和其他运载系统（包括弹道导弹、巡航导弹、火箭和无人驾驶飞行器）及其专用物项和技术，第二部分是与第一部分第一项相关的物项和技术。
Part 1 of this List includes missiles and other delivery systems (including ballistic missiles, cruise missiles, rockets and unmanned air vehicles) as well as their specially designed items and technologies. Part 2 includes items and technologies related to Item 1 of Part 1
（二）含有第一部分中所列物项的系统应被视为第一部分的物项；但如所含物项与系统不可分或不可复制，且系统为民用用途设计，则该系统应被视为第二部分的物项。
If a Part 1 item is included in a system, that system will also be considered as a Part 1 item, except when the incorporated item cannot be separated, removed or duplicated and the system is designed for civilian uses, where the item will be considered as a Part 2 item
（三）本清单所列任何项目均包括与之直接相关的技术。
All items listed in this List include their directly related technologies.
二、定义
DEFINITIONS
本清单应用以下定义：
For the purpose of this List, the following definitions apply:
（一）"技术"是指"研制"、"生产"或"使用"本清单所列物项所需要，并可以"技术资料"或"技术援助"的形式传授的专门知识。但"技术"不包括"公开领域技术"或"基础科学研究"中的技术。
"Technology" means specific information which is required for the "development", "production" or "use" of a product. The information may take the form of "technical data" or "technical assistance". But “technology” does not include technology "in the public domain" nor "basic scientific research"
1、"公开领域技术"是指没有传播限制而可以自由获得的技术（包括仅受版权限制的技术）。
"In the public domain" as it applies to this List means technology which has been made available without restrictions upon its further dissemination. (Copyright restrictions do not remove technology from being "in the public domain".)
2、"基础科学研究"是指主要为获得贯穿在现象和观察到的事实中的基本原理性知识，而不是为了达到特定的实用目的或目标所进行的实验或理论工作。
"Basic scientific research" means experimental or theoretical work undertaken principally to acquire new knowledge of the fundamental principles of phenomena and observable facts, not primarily directed towards a specific practical aim or objective
（二）"研制"是指生产以前的所有阶段，如：
"Development" is related to all phases prior to "production" such as:
1、设计
Design
2、设计研究
Design research
3、设计分析
Design analysis
4、方案研究
Design concepts
5、样机的装配和试验
Assembly and testing of prototypes
6、试生产方案
Pilot production schemes
7、设计资料
Design data
8、把设计资料转化为产品的工艺过程
Process of transforming design data into a product
9、结构设计
Configuration design
10、总体设计
Integration system design
11、绘制设计图纸
Layouts
（三）"生产"是指所有的生产阶段，如：
"Production" means all production phases such as:
1、生产设计
Production engineering
2、制造
Manufacture
3、总成
Integration
4、装配
Assembly
5、检验
Inspection
6、试验
Testing
7、质量保证
Quality assurance
（四）"使用"是指：
"Use" means:
1、操作
Operation
2、安装（包括现场安装）
Installation (including on-site installation)
3、维护
Maintenance
4、修理
Repair
5、大修
Overhaul
6、翻修
Refurbishing
（五）"技术资料"是指下列形式：
"Technical data" may take forms such as:
1、规划
Blueprints
2、计划
Plans
3、图表
Diagrams
4、数学模型
Models
5、计算公式
Formulae
6、工程设计与技术规范
Engineering designs and specifications
7、书写或记录在磁盘、磁带、只读或可读写存储器等存储介质上的手册和说明书
Manuals and instructions written or recorded on other media or devices such as disk, tape, read-only memories
（六）"技术援助"是指：
"Technical assistance" may take forms such as:
1、技术指导
Instruction
2、派遣熟练工人
Skills
3、培训
Training
4、传授知识
Working knowledge
5、咨询服务
Consulting services
（七）"生产设施"是指在研制生产的一个或几个阶段中组成整套装置的设备，以及为此专门设计的软件。
"Production facilities" means equipment and specially designed software therefor integrated into installations for "development" or for one or more phases of "production"
（八）"生产设备"是指工具、样板、夹具、芯模、塑模、冲模、定位装置、校准装置、试验设备以及其他机械和部件。这些设备只限于那些为"研制"或"生产"的一个或几个阶段而专门设计的设备。
"Production equipment" means tooling, templates, jigs, mandrels, moulds, dies, fixtures, alignment mechanisms, test equipment, other machinery and components therefor, limited to those specially designed or modified for "development" or for one or more phases of "production"
第一部分
PART I
一、能把500千克以上有效载荷投掷到300千米以上的完整弹道导弹、运载火箭、探空火箭、巡航导弹和无人驾驶航空飞行器，以及为其专门设计的生产设施
Complete ballistic missiles, space launch vehicles, sounding rockets, cruise missile and unmanned air vehicles that can be used to deliver at least a 500 kg payload to a range of at least 300 km as well as the specially designed production facilities therefor.
二、能用于第一项中各系统的如下各项：
The following items usable in the systems in Item 1:
（一）弹道导弹的各级
Individual stages of a ballistic missile;
（二）火箭的各级
Individual stages of a rocket;
（三）导弹再入飞行器
Reentry vehicles of missiles;
（四）用于上述第（三）项的陶瓷材料防热套及其部件
Heat shields and components fabricated of ceramic materials used in Subitem (3);
（五）用于上述第（三）项的烧蚀材料防热套及其部件
Heat shields and components fabricated of ablative materials used in Subitem (3);
（六）用于上述第（三）项的、用热容高的轻质材料制造的热沉装置及其部件
Heat sinks and components fabricated of light-weight, high heat capacity materials used in Subitem (3);
（七）为上述第（三）项专门设计的电子设备
Electronic equipment specially designed for Subitem (3);
（八）推力大于或等于90千牛顿的可贮存推进剂液体火箭发动机
Storable liquid propellant rocket engines, having a thrust force of 90 kN or greater;
（九）总冲大于或等于1100千牛顿·秒的固体火箭发动机
Solid propellant rocket engines, having a total impulse capacity of 1100 kN·s or greater;
（十）能使射程为300千米的弹道导弹的精度达到10千米或以下圆公算偏差的制导装置
Guidance sets capable of achieving system accuracy of 10 km or less (CEP) for ballistic missiles with a range of 300 km;
（十一）推力矢量控制系统
Thrust vector control sub-systems;
（十二）弹头保险、解保、引信和起爆装置
Warhead safing, arming, fuzing, and firing mechanisms;
（十三）为上述第（一）至第（十二）项专门设计的生产设施与设备
Production facilities and equipments designed for Subitems (1) to (12)
三、运载火箭的级间机构及为其专门设计的生产设备
Interstage mechanisms for space launch vehicles and the specially designed production equipment therefor
四、火箭发动机的壳体及为其专门设计的生产设备
Rocket motor cases and the specially designed production equipment therefor
五、专门设计或改进用于第一部分第一项中各系统的液压、机械、光电或机电控制系统
Hydraulic, mechanical, electro-optical, or electro-mechanical flight control systems specially designed or modified for the systems in Item 1 of Part I
六、专门设计或改进用于第一部分第一项中各系统的姿态控制设备
Attitude control equipment specially designed or modified for the systems in Item 1 of Part I
七、为了优化无人驾驶航空飞行器在整个飞行过程中的空气动力特性而使机身、推进系统和升力控制面一体化的设计技术
Design technology for integration of air vehicle fuselage, propulsion system and lifting control surfaces to optimize aerodynamic performance throughout the flight regime of an unmanned air vehicle
八、为了优化导弹或火箭弹道而使制导、控制和推进数据一体化成为一个飞行管理系统的设计技术
Design technology for integration of the guidance, flight control, and propulsion data into a flight management system for optimization of trajectory of ballistic missiles or space launch vehicles
九、能用于第一项中各系统的无源电子干扰设备
Passive interferometer equipment usable in the systems in Item 1
十、为第一项的装卸、控制、待发射和发射而设计或改进的仪器和装置
Apparatus and devices designed or modified for the handling, control, activation and launching of the systems in Item 1
十一、为第一项的运输、装卸、控制、待发射和发射而设计或改进的车辆
Vehicles designed or modified for the transport, handling, control, activation and launching of the systems in Item 1
十二、静态或工作状态精度为1毫伽或更好、达到稳态记录时间至多为2分钟的机载或舰载重力仪、重力梯度仪及为其专门设计的部件
Gravity meters, gravity gradiometers, and specially designed components therefore, for airborne or marine use, and having a static or operational accuracy of one milligal or better, with a time to steady-state registration of two minutes or less;
十三、精密跟踪系统
Precision tracking systems:
（一）安装在火箭系统或无人驾驶航空飞行器上的采用转发器的跟踪系统，它连同地面或空中的参考基准或导航卫星系统可提供飞行中位置和速度的实时测量数据
Tracking systems which use a translator installed on the rocket system or unmanned air vehicle in conjunction with either surface or airborne references or navigation satellite systems to provide real-time measurements of in-flight position and velocity;
（二）用来事后处理记录数据，从而能够确定飞行器在整个飞行轨迹中的位置的软件
Software which processes post-flight, recorded data, enabling determination of vehicle position throughout its flight path
十四、降低雷达波反射特性的结构件
Structure specially designed for reduced radar reflectivity
十五、用来降低雷达波反射特性的结构材料
Structural material specially designed for reduced radar reflectivity
十六、用来降低雷达波反射特性的涂料
Coatings specially designed for reduced radar reflectivity
十七、专门设计用来降低光学反射或辐射的涂料
Coatings specially designed for reduced optical reflectivity or emissivity
十八、用于上述第十四至第十七项的生产设备、技术及专门设计的软件
Production equipment, technology and specially designed software usable in Items 14 to 17 above
十九、降低雷达反射率、紫外/红外线信号与声学信号的技术及专门设计的软件
Technology and specially designed software for reduced radar reflectivity, ultraviolet/infrared signatures or acoustic signatures
第二部分
PART II
一、再入飞行器组件、部件和相关技术
Reentry Vehicle Components and Technology Thereof
（一）陶瓷防热部件的设计与制造技术
Design and manufacturing technology for ceramic heat shields;
（二）烧蚀防热部件的设计与制造技术
Design and manufacturing technology for ablative heat shields;
（三）热沉装置及其部件的设计与制造技术
Design and manufacturing technology for heat sinks and components thereof;
（四）保护免受电磁脉冲、X射线、冲击波和热辐射综合效应损害的装置
Structure for protection against electromagnetic pulse (EMP) and X-rays and shock wave and combined blast and thermal effects:
1、抗辐射加固的微型电路和探测器
Radiation-hardened microcircuits and detectors;
2、用来承受不小于418焦耳/平方厘米的热冲击和超压不小于50千帕的冲击波综合效应的加固结构
Hardened radome structure designed to withstand a combined thermal shock greater than 418 J/cm2 accompanied by a peak over pressure of greater than 50 kPa
（五）抗辐射加固的设计技术
Design technology for radiation hardenning;
（六）加固结构的设计技术
Design technology for hardened structure
二、推进系统组件、部件及相关技术
Propulsion Components and Technology Thereof
（一）小型和燃烧效率高的轻型涡轮喷气发动机
Lightweight turbojet engines that are small and fuel efficient;
（二）小型和燃烧效率高的轻型涡轮风扇发动机
Lightweight turbofan engines that are small and fuel efficient;
（三）小型和燃烧效率高的轻型涡轮组合式发动机
Lightweight turbocompound engines that are small and fuel efficient;
（四）冲压喷气发动机
Ramjet engines;
（五）超燃冲压喷气发动机
Scramjet engines;
（六）脉冲喷气发动机
Pulse jet engines;
（七）组合循环发动机
Combined cycle engines;
（八）上述第（四）至第（七）项的燃烧调节装置
Devices to regulate combustion for the above Subitems (4) to (7);
（九）经设计或改进能在20至2000赫兹之间和加速度大于10个标准重力加速度（均方根值）的振动环境中工作的液体和悬浮推进剂控制系统及为此专门设计的部件
Liquid and slurry propellant control systems, and specially designed components thereof, designed or modified to operate in vibration environments of more than 10 g (RMS) between 20 Hz and 2,000 Hz:
1、绝压等于或大于7000千帕时流量等于或大于24升/分和作动器响应时间小于100微秒的伺服阀
Servo valves designed for flow rates of 24 liters per minute or greater, at an absolute pressure of 7,000 kPa or greater, that have an actuator response time of less than 100 microseconds;
2、用于液体推进剂的、转速等于或大于8000转/分，并且出口压力等于或大于7000千帕的泵
Pumps, for liquid propellants, with shaft speeds equal to or greater than 8,000 RPM or with discharge pressures equal to or greater than 7,000 kPa
（十）为上述第（一）至第（九）项专门设计的生产设施
Production facilities specially designed for the above Subitems (1) to (9)
三、液体推进剂
Liquid Propellants
（一）纯度70%以上的肼
Hydrazine with a concentration of more than 70 percent;
（二）偏二甲肼
Unsymmetric dimethylhydrazine (UDMH);
（三）甲基肼
Monomethylhydrazine (MMH);
（四）混胺
Mixed amine;
（五）四氧化二氮
Dinitrogen tetroxide;
（六）红发烟硝酸
Red Fuming Nitric Acid
四、固体推进剂及其组分
Solid Propellant and Propellant Constituents
（一）颗粒尺寸小于500微米、不论球形的、椭球体的、雾化的、片状的或研碎的金属燃料，含下述任何金属或其合金，含量等于或大于97%：
Metal fuels with particle sizes less than 500 mm, whether spherical, atomized, spheroidal, flaked or ground, consisting of 97 percent by weight or greater of any of the following metal and alloys of these:
1、锆
Zirconium;
2、硼
Boron;
3、镁
Magnesium;
4、钛
Titanium;
5、铀
Uranium;
6、钨
Tungsten;
7、锌
Zinc;
8、铈
Cerium
（二）粒度小于500微米的球形高氯酸铵（过氯酸铵）
Ammonium perchlorate with particle sizes less than 500 mm;
（三）同时满足如下条件的球形铝粉：
Spherical aluminum powder meeting the following requirements:
1、颗粒均匀
With particle of uniform diameter;
2、铝含量等于或大于97%（按重量计）
With aluminum content of 97 percent or greater;
3、粒度小于500微米
With diameter of less than 500 mm
（四）能量密度大于40兆焦耳/千克的硼浆
Boron Slurry, having an energy density of more than 40 x 106 J/kg;
（五）硝胺类
Nitro-amines:
1、奥托金（环四甲基四硝胺HMX）
Cyclotetramethylene-tetranitramene (HMX);
2、黑索金（环三甲基三硝胺RDX）
Cyclotrimethylene-trinitramine (RDX)
（六）复合推进剂
Composite Propellants:
1、模压的胶质推进剂
Molded colloid propellants;
2、含有硝化粘接剂和5%以上的铝粉的推进剂
Propellant including nitrate bonding agents and with an aluminum (particle) content of 5 percent or greater
（七）聚合物
Polymeric substances:
1、端羧基聚丁二烯（CTPB）
Carboxl-terminated polybutadiene (CTPB);
2、端羟基聚丁二烯（HTPB）
Hydroxy-terminated polybutadiene (HTPB)
（八）三乙胺点火剂
Triethylamine as an igniting agent
五、制导、控制系统设备、部件及相关技术
Guidance and Control Set, Components and Related Technologies
（一）天文陀螺罗盘及其他利用天体或卫星进行导航的装置
Gyro-astro compasses and other devices which derive position or orientation by means of automatically tracking celestrial bodies or satellites;
（二）飞行控制软件和测试软件
Flight control software and related test software;
（三）陀螺稳定平台
Gyro stability platform;
（四）无人航空飞行器的自动驾驶仪
Automatic pilots for UAV;
（五）额定漂移率小于0.5度/小时的陀螺仪
Gyros with a rated drift rate stability of less than 0.5 degree per hour;
（六）惯性平台测试台（包括高精度离心机和转台）
Test table for inertial platform (including high-accuracy centrifuges and rotating table);
（七）惯性测量单元测试仪
Inertial Measurement Unit (IMU) tester;
（八）惯性测量单元稳定元件加工夹具
Inertial Measurement Unit (IMU) stable element handling fixture;
（九）惯性平台平衡夹具
Inertial Measurement Unit (IMU) platform balance fixture;
（十）陀螺调谐测试仪
Tester for gyro tuning;
（十一）陀螺动态平衡测试仪
Tester for gyro dynamic balance;
（十二）陀螺/马达运转试验台
Gyro run-in/motor test station;
（十三）陀螺抽气和充气台
Gyro evacuation and filling station;
（十四）陀螺轴承用的离心架
Centrifuge fixture for gyro bearings;
（十五）生产环形激光陀螺用的矩形散射仪
Rectangular scatterometer for ring laser gyro production;
（十六）生产环形激光陀螺用的极性散射仪
Polarity scatterometer for ring laser gyro production;
（十七）生产环形激光陀螺用的反射计
Reflectometer for ring laser gyro production;
（十八）生产环形激光陀螺用的表面光度仪
Surface profilometer for ring laser gyro production;
（十九）比例误差小于0.25%的加速度表
Accelerometers with a proportional error of 0.25 percent or less;
（二十）加速度表测试台
Accelerometer test station;
（二十一）加速度表轴线校准台
Accelerometer axis align station;
（二十二）为陀螺或加速度表专门设计的试验、标定和校准装置
Specially designed test, calibration, and alignment equipment for gyro or accelerometer
六、目标探测装置及电子系统
Target Detection System and Related Electronics
（一）雷达设备
Radar systems;
（二）高度表
Altimeters;
（三）地形等高线绘制设备
Terrain contour mapping equipment;
（四）场景绘图及相关设备（包括数字和模拟设备）
Scene mapping and correlation (both digital and analog) equipment;
（五）成像传感器设备
Imaging sensor equipment;
（六）专门设计的导航信息处理机及其软件
Processors and software specially designed for processing navigation information;
（七）排除传导热的电子装置和部件
Electronic devices and components removed of conductive heat;
（八）抗辐射加固的电子装置和部件
Radiation-hardened electronic devices and components;
（九）能可靠地在超过125摄氏度温度下短期工作的电子装置和部件
Electronic assemblies and components operating at temperatures in excess of 125 °C for a short period of time;
（十）具有专门设计的整体结构支承件的电子装置和部件
Electronic devices and components with specially designed integrated support;
（十一）遥测设备及其技术
Telemetry equipment and related technologies;
（十二）遥测或遥控的地面设备
Telemetering and telecontrol ground equipment;
（十三）满足如下条件的模拟和数字计算装置：
Analogue computers and digital computers having either of the following characteristics:
1、连续工作时的环境温度范围为-45摄氏度至+55摄氏度；或
Rated for continuous operation at temperatures from below minus 45 °C to above plus 55 °C;
2、进行了加固和抗辐射加固的
Designed as ruggedized or radiation hardened
（十四）具有以下特性之一的模/数转换器：
Analogue-to-digital converter having one of the following characteristics:
1、能在-54摄氏度至+125摄氏度的温度范围内连续工作，并且
Rated for operation at temperatures from below minus 54 °C to above plus 125 °C, and
2、能设计成符合加固设备的军用技术规范；或
Designed to meet military specifications for ruggedized equipment; or
3、能设计或改进成军用，或设计成抗辐射的，并具有如下特性之一：
Designed or modified for military use or designed as radiation hardened, and having one of the following characteristics:
（1）在额定精度下转换速率大于每秒200000次完整的转换
Converting at a rate of over 200000 times (complete conversion) per second under rated accuracy;
（2）在规定的工作温度范围内精度超过全量程的1/10000以上
With accuracy exceeding 1/10000 of the whole range in the rated temperature scope;
（3）品质因数为1×108以上（每秒转换次数除以精度）
With quality factor of over 1′108 (complete conversion times per second divided by accuracy);
（4）内含的模数转换器微型电路具有下列特性：
The inbuilt microcircuits having the following characteristics:
①达到最大分辨率时的最长转换时间小于20微秒
The maximum converting time is less than 20 microseconds under maximum resolution, and
②在规定的工作温度范围内，额定的非线性度高于全量程的0.025%
The rated nonlinearity is better than 0.025 percent of the range in rated temperature scope
（十五）保护电子设备和电气系统免受外部电磁脉冲和电磁干扰危害的设计技术
Design technology for protection of avionics and electrical subsystems against electromagnetic pulse and electromagnetic interference hazards from external sources:
1、屏蔽系统的设计技术
Design technology for shielding systems;
2、加固的电气线路和分系统的线路设计技术
Design technology for the configuration of hardened electrical circuits and subsystems;
3、上述加固标准的确定
Determination of hardening criteria for the above
七、材料
Material
（一）结构复合材料，包括各种复合材料结构件、层压板和制品，以及以树脂或金属为基体的用纤维和丝材增强而制成的各种预浸件和预成形件，其中增强材料的比拉伸强度大于7.62×104米和比模量大于3.18×106米
Structural composites, including composite structures, laminates, and manufactures thereof, and resin impregnated fibre prepregs and metal coated fibre preforms therefor, made with either organic matrix or metal matrix utilizing fibrous or filamentary reinforcements having a specific tensile strength greater than 7.62 x 104 m and a specific modulus greater than 3.18 x 106 m:
1、聚酰亚胺复合材料
Polyimide composite;
2、聚酰胺基复合材料
Polyamide composite;
3、聚碳酸脂复合材料
Polycarbonate composite;
4、石英纤维增强的复合材料
Quartz-fibre-reinforced composite;
5、碳纤维增强的复合材料
Carbon-fibre-reinforced composite;
6、硼纤维增强的复合材料
Boron-fibre-reinforced composite;
7、镁金属基复合材料
Magnesium matrix composite;
8、钛金属基复合材料
Titanium matrix composite
（二）在100赫兹至10000赫兹的频率下，介电常数小于6的陶瓷复合材料
Ceramic composite materials with dielectric constant less than 6 at frequencies from 100 Hz to 10,000 MHz;
（三）在20摄氏度温度下测得具有下列特性的人造细晶粒整体石墨
Fine grain bulk artificial graphites having the following features measured at 20 °C:
1、密度大于1.72克/立方厘米
With a bulk density of at least 1.72 g/cm3;
2、拉伸断裂应变等于或大于0.7%
With a tension rupture strain of at least 0.7 percent;
3、热膨胀系数等于或小于2.75×10-6/摄氏度（在20摄氏度至982摄氏度温度范围内测得）
With a heat expansion coefficient of at least 2.75′10-6 (measured at temperatures from 20 °C to 982 °C)
（四）多次浸渍的热解碳/碳材料
Resaturated pyrolized carbon-carbon materials;
（五）特种钢材
Special Steel:
具有以下特性的钛稳定的双炼不锈钢：
Titanium-stabilized duplex stainless steel (Ti-DSS) having the following characteristics:
1、含17.0%至26.5%（重量）的铬和4.5%至7.0%（重量）的镍，并具有
Containing 17.0 to 26.5 weight percent chromium and 4.5 to 7.0 weight percent nickel;
2、铁素体-奥氏体微观结构（亦称"两相"微观结构），其中奥氏体的体积百分比最少为10%
Having a ferritic-austenitic microstructure (also referred to as a two-phase microstructure) of which at least 10 percent is austenite by volume;
3、具有以下任何形状：
Having any of the following forms:
（1）每一维的尺寸为100毫米或100毫米以上的锭材或棒材
Ingots or bars having a size of 100 mm or more in each dimension;
（2）宽度等于或大于600毫米和厚度等于或小于3毫米的薄板
Sheets having a width of 600 mm or more and a thickness of 3 mm or less;
（3）外径等于或大于600毫米和壁厚等于或小于3毫米的管材
Tubes having an outer diameter of 600 mm or more and a wall thickness of 3 mm or less
（六）陶瓷防热材料
Ceramic heat shielding material;
（七）烧蚀防热材料
Ablative heat shielding material
八、导弹、火箭相关设计和试验技术及设备
Design and Test Equipment and Technologies Related to Ballistic Missiles and Rockets
（一）系统建模、仿真或总体设计的专用软件及相关模拟和数字计算机
Specially designed software, or analogue and digital computers thereof, for modeling, simulation, or design integration of the systems;
（二）能够施加等于或大于100千牛顿的力并且使用数控技术的振动试验设备，以及专门为此设计的辅助设备和软件
Vibration test systems capable of providing a force of 100kN or more and incorporating a digital controller, as well as specially designed vibration test auxiliaries and software;
（三）超音速（马赫数为1.4至5）和高超音速（马赫数为5至15）的风洞，但专门设计用于教学目的和试验区的尺寸（在内部测得的）小于25厘米的风洞除外
Wind-tunnel for supersonic (Mach 1.4 to 5) or hypersonic (Mach 5 to 15) speeds except those specially designed for teaching and those with the test area dimensions smaller than 25 cm (measured internally);
（四）能够试验推力大于90千牛顿的固体或液体推进剂火箭发动机或者能同时测量三个推力分量的试车台
Test benches which have the capacity to handle solid or liquid propellant rocket motors of more than 90 kN of thrust, or which are capable of simultaneously measuring the three axial thrust components
九、生产设备和生产技术
Production Equipment and Production Technology
（一）生产第二部分第四项所述固体推进剂的设备
Equipment for production of solid propellants listed in Item 4 of Part II:
1、同时满足如下条件的间歇式搅拌机：
Batch mixers having:
（1）总容量大于110升
A total volumetric capacity of 110 litres or more; and
（2）至少装有一个偏离中心的搅拌轴
At least one mixing/kneading shaft mounted off centre
2、同时满足如下条件的连续式搅拌机：
Continuous mixers having:
（1）具有两个或更多个搅拌轴
Two or more mixing/kneading shafts; and
（2）具有能够打开的搅拌室
Capability to open the mixing chamber
3、在受控环境中生产雾化的或球状的金属粉末的设备
Equipment for the production of atomized or spherical metallic powder in a controlled environment;
4、流体能粉碎机
Fluid energy mills;
5、生产固体推进剂用的贮运设备
Handling equipment for production of solid propellant;
6、生产固体推进剂用的固化设备
Curing equipment for production of solid propellant;
7、生产固体推进剂用的浇注设备
Casting equipment for production of solid propellant;
8、生产固体推进剂用的压制设备
Pressing equipment for production of solid propellant;
9、生产固体推进剂用的验收试验设备
Acceptance testing equipment for production of solid propellant;
10、生产固体推进剂用的机加工设备
Machining equipment for production of solid propellant;
11、生产固体推进剂用的拉挤设备
Extruding equipment for production of solid propellant
（二）生产第二部分第三项中所述液体推进剂的设备
Equipment for producing liquid propellant in Item 3 of Part II:
1、生产液体推进剂用的贮运设备
Handling equipment for production of liquid propellant;
2、液体推进剂的生产设备
Production equipment for liquid propellant;
3、生产液体推进剂用的验收试验设备
Acceptance testing equipment for production of liquid propellant
（三）热解沉积和增密的设备与技术
Pyrolytic deposition and densification equipment and technology
1、在注模、芯模或其他基料上用母质气体在1300摄氏度到2900摄氏度高温范围内和130帕到20千帕的压力下分解而产生出热解衍生材料的生产技术，包括母质气体的合成、流量、工艺过程控制的规程以及参数控制的技术在内
Technology for producing pyrolytically derived materials formed on a mould, mandrel or other substrate from precursor gases which decompose at temperatures from 1,300 °C to 2,900 °C and at pressures of 130 Pa to 20 kPa, including technology for the composition of precursor gases, flow-rates and process control schedules and parameters;
2、为上述工艺过程而专门设计的喷嘴
Specially designed nozzles for the above processes;
3、满足如下条件的等静压机：
Isostatic presses having all of the following characteristics:
（1）最大工作压力等于或大于69兆帕
Maximum working pressure of 69 MPa or greater;
（2）能够达到并保持等于或高于600 摄氏度的可控热环境
Designed to achieve and maintain a controlled thermal environment of 600 °C or greater, and
（3）具有内径等于或大于254毫米的空腔
Possessing a chamber cavity with an inside diameter of 254 mm or greater
4、用于碳碳复合材料增密的化学气相沉积炉
Chemical vapor deposition furnaces for the densification of carbon-carbon composites;
5、热解沉积和增密工艺过程控制装置及专门设计的软件
Pyrolytic deposition and densification process controls equipment and specially designed software therefor
（四）生产复合材料部件的设备和技术
Equipment and technology for production of composite component:
1、三坐标或多坐标联动和程控的纤维缠绕机及为其专门设计的计算机或数控软件
Filament winding machines coordinated and programmed in three or more axes, and specially designed computers and software thereof;
2、具有两个或两个以上坐标的数控和程控的铺带机及为其专门设计的软件
Tape-laying machines coordinated and programmed in two or more axes, and specially designed software thereof;
3、纤维结构复合材料编织机的成套附件及其改装附件
Adapters and modification kits of weaving machines for fibre structure composites;
4、调节热压罐和液压釜中温度、压力和大气的技术资料和规程
Technical data and procedures for the regulation of temperature, pressures or atmosphere in autoclaves or hydroclaves;
5、生产聚合纤维（如聚丙烯腈、粘胶和聚碳硅烷）的设备，包括在加热过程中对纤维施加张力的专门设备
Equipment for converting polymeric fibres (such as polyacrylonitrile, rayon or polycarbosilane) including special provision to strain the fibre during heating;
6、用于使元素和化合物气相沉积在被加热的纤维基体上的设备
Equipment for the vapor deposition of elements or compounds on heated filament substrates;
7、难熔陶瓷（如氧化铝）湿纺设备
Equipment for the wet-spinning of refractory ceramics (such as aluminium oxide);
8、对纤维表面进行特殊处理的设备
Equipment for special fibre surface treatment;
9、用于生产预浸件和预成型件的设备
Equipment for producing prepregs and preforms;
10、用于复合材料结构件、层压板材和制品的预成型件加压、固化、浇注、热压或粘接的注模、芯模、压模和工装夹具等
Moulds, mandrels, dies, fixtures and tooling for the preform pressing, curing, casting, sintering or bonding of composite structures, laminates and manufactures thereof
The Missiles and Missile-related Items and Technologies Export Control List 25 August 2002
一、前言
INTRODUCTION
（一）本清单第一部分是导弹和其他运载系统（包括弹道导弹、巡航导弹、火箭和无人驾驶飞行器）及其专用物项和技术，第二部分是与第一部分第一项相关的物项和技术。
Part 1 of this List includes missiles and other delivery systems (including ballistic missiles, cruise missiles, rockets and unmanned air vehicles) as well as their specially designed items and technologies. Part 2 includes items and technologies related to Item 1 of Part 1
（二）含有第一部分中所列物项的系统应被视为第一部分的物项；但如所含物项与系统不可分或不可复制，且系统为民用用途设计，则该系统应被视为第二部分的物项。
If a Part 1 item is included in a system, that system will also be considered as a Part 1 item, except when the incorporated item cannot be separated, removed or duplicated and the system is designed for civilian uses, where the item will be considered as a Part 2 item
（三）本清单所列任何项目均包括与之直接相关的技术。
All items listed in this List include their directly related technologies.
二、定义
DEFINITIONS
本清单应用以下定义：
For the purpose of this List, the following definitions apply:
（一）"技术"是指"研制"、"生产"或"使用"本清单所列物项所需要，并可以"技术资料"或"技术援助"的形式传授的专门知识。但"技术"不包括"公开领域技术"或"基础科学研究"中的技术。
"Technology" means specific information which is required for the "development", "production" or "use" of a product. The information may take the form of "technical data" or "technical assistance". But “technology” does not include technology "in the public domain" nor "basic scientific research"
1、"公开领域技术"是指没有传播限制而可以自由获得的技术（包括仅受版权限制的技术）。
"In the public domain" as it applies to this List means technology which has been made available without restrictions upon its further dissemination. (Copyright restrictions do not remove technology from being "in the public domain".)
2、"基础科学研究"是指主要为获得贯穿在现象和观察到的事实中的基本原理性知识，而不是为了达到特定的实用目的或目标所进行的实验或理论工作。
"Basic scientific research" means experimental or theoretical work undertaken principally to acquire new knowledge of the fundamental principles of phenomena and observable facts, not primarily directed towards a specific practical aim or objective
（二）"研制"是指生产以前的所有阶段，如：
"Development" is related to all phases prior to "production" such as:
1、设计
Design
2、设计研究
Design research
3、设计分析
Design analysis
4、方案研究
Design concepts
5、样机的装配和试验
Assembly and testing of prototypes
6、试生产方案
Pilot production schemes
7、设计资料
Design data
8、把设计资料转化为产品的工艺过程
Process of transforming design data into a product
9、结构设计
Configuration design
10、总体设计
Integration system design
11、绘制设计图纸
Layouts
（三）"生产"是指所有的生产阶段，如：
"Production" means all production phases such as:
1、生产设计
Production engineering
2、制造
Manufacture
3、总成
Integration
4、装配
Assembly
5、检验
Inspection
6、试验
Testing
7、质量保证
Quality assurance
（四）"使用"是指：
"Use" means:
1、操作
Operation
2、安装（包括现场安装）
Installation (including on-site installation)
3、维护
Maintenance
4、修理
Repair
5、大修
Overhaul
6、翻修
Refurbishing
（五）"技术资料"是指下列形式：
"Technical data" may take forms such as:
1、规划
Blueprints
2、计划
Plans
3、图表
Diagrams
4、数学模型
Models
5、计算公式
Formulae
6、工程设计与技术规范
Engineering designs and specifications
7、书写或记录在磁盘、磁带、只读或可读写存储器等存储介质上的手册和说明书
Manuals and instructions written or recorded on other media or devices such as disk, tape, read-only memories
（六）"技术援助"是指：
"Technical assistance" may take forms such as:
1、技术指导
Instruction
2、派遣熟练工人
Skills
3、培训
Training
4、传授知识
Working knowledge
5、咨询服务
Consulting services
（七）"生产设施"是指在研制生产的一个或几个阶段中组成整套装置的设备，以及为此专门设计的软件。
"Production facilities" means equipment and specially designed software therefor integrated into installations for "development" or for one or more phases of "production"
（八）"生产设备"是指工具、样板、夹具、芯模、塑模、冲模、定位装置、校准装置、试验设备以及其他机械和部件。这些设备只限于那些为"研制"或"生产"的一个或几个阶段而专门设计的设备。
"Production equipment" means tooling, templates, jigs, mandrels, moulds, dies, fixtures, alignment mechanisms, test equipment, other machinery and components therefor, limited to those specially designed or modified for "development" or for one or more phases of "production"
第一部分
PART I
一、能把500千克以上有效载荷投掷到300千米以上的完整弹道导弹、运载火箭、探空火箭、巡航导弹和无人驾驶航空飞行器，以及为其专门设计的生产设施
Complete ballistic missiles, space launch vehicles, sounding rockets, cruise missile and unmanned air vehicles that can be used to deliver at least a 500 kg payload to a range of at least 300 km as well as the specially designed production facilities therefor.
二、能用于第一项中各系统的如下各项：
The following items usable in the systems in Item 1:
（一）弹道导弹的各级
Individual stages of a ballistic missile;
（二）火箭的各级
Individual stages of a rocket;
（三）导弹再入飞行器
Reentry vehicles of missiles;
（四）用于上述第（三）项的陶瓷材料防热套及其部件
Heat shields and components fabricated of ceramic materials used in Subitem (3);
（五）用于上述第（三）项的烧蚀材料防热套及其部件
Heat shields and components fabricated of ablative materials used in Subitem (3);
（六）用于上述第（三）项的、用热容高的轻质材料制造的热沉装置及其部件
Heat sinks and components fabricated of light-weight, high heat capacity materials used in Subitem (3);
（七）为上述第（三）项专门设计的电子设备
Electronic equipment specially designed for Subitem (3);
（八）推力大于或等于90千牛顿的可贮存推进剂液体火箭发动机
Storable liquid propellant rocket engines, having a thrust force of 90 kN or greater;
（九）总冲大于或等于1100千牛顿·秒的固体火箭发动机
Solid propellant rocket engines, having a total impulse capacity of 1100 kN·s or greater;
（十）能使射程为300千米的弹道导弹的精度达到10千米或以下圆公算偏差的制导装置
Guidance sets capable of achieving system accuracy of 10 km or less (CEP) for ballistic missiles with a range of 300 km;
（十一）推力矢量控制系统
Thrust vector control sub-systems;
（十二）弹头保险、解保、引信和起爆装置
Warhead safing, arming, fuzing, and firing mechanisms;
（十三）为上述第（一）至第（十二）项专门设计的生产设施与设备
Production facilities and equipments designed for Subitems (1) to (12)
三、运载火箭的级间机构及为其专门设计的生产设备
Interstage mechanisms for space launch vehicles and the specially designed production equipment therefor
四、火箭发动机的壳体及为其专门设计的生产设备
Rocket motor cases and the specially designed production equipment therefor
五、专门设计或改进用于第一部分第一项中各系统的液压、机械、光电或机电控制系统
Hydraulic, mechanical, electro-optical, or electro-mechanical flight control systems specially designed or modified for the systems in Item 1 of Part I
六、专门设计或改进用于第一部分第一项中各系统的姿态控制设备
Attitude control equipment specially designed or modified for the systems in Item 1 of Part I
七、为了优化无人驾驶航空飞行器在整个飞行过程中的空气动力特性而使机身、推进系统和升力控制面一体化的设计技术
Design technology for integration of air vehicle fuselage, propulsion system and lifting control surfaces to optimize aerodynamic performance throughout the flight regime of an unmanned air vehicle
八、为了优化导弹或火箭弹道而使制导、控制和推进数据一体化成为一个飞行管理系统的设计技术
Design technology for integration of the guidance, flight control, and propulsion data into a flight management system for optimization of trajectory of ballistic missiles or space launch vehicles
九、能用于第一项中各系统的无源电子干扰设备
Passive interferometer equipment usable in the systems in Item 1
十、为第一项的装卸、控制、待发射和发射而设计或改进的仪器和装置
Apparatus and devices designed or modified for the handling, control, activation and launching of the systems in Item 1
十一、为第一项的运输、装卸、控制、待发射和发射而设计或改进的车辆
Vehicles designed or modified for the transport, handling, control, activation and launching of the systems in Item 1
十二、静态或工作状态精度为1毫伽或更好、达到稳态记录时间至多为2分钟的机载或舰载重力仪、重力梯度仪及为其专门设计的部件
Gravity meters, gravity gradiometers, and specially designed components therefore, for airborne or marine use, and having a static or operational accuracy of one milligal or better, with a time to steady-state registration of two minutes or less;
十三、精密跟踪系统
Precision tracking systems:
（一）安装在火箭系统或无人驾驶航空飞行器上的采用转发器的跟踪系统，它连同地面或空中的参考基准或导航卫星系统可提供飞行中位置和速度的实时测量数据
Tracking systems which use a translator installed on the rocket system or unmanned air vehicle in conjunction with either surface or airborne references or navigation satellite systems to provide real-time measurements of in-flight position and velocity;
（二）用来事后处理记录数据，从而能够确定飞行器在整个飞行轨迹中的位置的软件
Software which processes post-flight, recorded data, enabling determination of vehicle position throughout its flight path
十四、降低雷达波反射特性的结构件
Structure specially designed for reduced radar reflectivity
十五、用来降低雷达波反射特性的结构材料
Structural material specially designed for reduced radar reflectivity
十六、用来降低雷达波反射特性的涂料
Coatings specially designed for reduced radar reflectivity
十七、专门设计用来降低光学反射或辐射的涂料
Coatings specially designed for reduced optical reflectivity or emissivity
十八、用于上述第十四至第十七项的生产设备、技术及专门设计的软件
Production equipment, technology and specially designed software usable in Items 14 to 17 above
十九、降低雷达反射率、紫外/红外线信号与声学信号的技术及专门设计的软件
Technology and specially designed software for reduced radar reflectivity, ultraviolet/infrared signatures or acoustic signatures
第二部分
PART II
一、再入飞行器组件、部件和相关技术
Reentry Vehicle Components and Technology Thereof
（一）陶瓷防热部件的设计与制造技术
Design and manufacturing technology for ceramic heat shields;
（二）烧蚀防热部件的设计与制造技术
Design and manufacturing technology for ablative heat shields;
（三）热沉装置及其部件的设计与制造技术
Design and manufacturing technology for heat sinks and components thereof;
（四）保护免受电磁脉冲、X射线、冲击波和热辐射综合效应损害的装置
Structure for protection against electromagnetic pulse (EMP) and X-rays and shock wave and combined blast and thermal effects:
1、抗辐射加固的微型电路和探测器
Radiation-hardened microcircuits and detectors;
2、用来承受不小于418焦耳/平方厘米的热冲击和超压不小于50千帕的冲击波综合效应的加固结构
Hardened radome structure designed to withstand a combined thermal shock greater than 418 J/cm2 accompanied by a peak over pressure of greater than 50 kPa
（五）抗辐射加固的设计技术
Design technology for radiation hardenning;
（六）加固结构的设计技术
Design technology for hardened structure
二、推进系统组件、部件及相关技术
Propulsion Components and Technology Thereof
（一）小型和燃烧效率高的轻型涡轮喷气发动机
Lightweight turbojet engines that are small and fuel efficient;
（二）小型和燃烧效率高的轻型涡轮风扇发动机
Lightweight turbofan engines that are small and fuel efficient;
（三）小型和燃烧效率高的轻型涡轮组合式发动机
Lightweight turbocompound engines that are small and fuel efficient;
（四）冲压喷气发动机
Ramjet engines;
（五）超燃冲压喷气发动机
Scramjet engines;
（六）脉冲喷气发动机
Pulse jet engines;
（七）组合循环发动机
Combined cycle engines;
（八）上述第（四）至第（七）项的燃烧调节装置
Devices to regulate combustion for the above Subitems (4) to (7);
（九）经设计或改进能在20至2000赫兹之间和加速度大于10个标准重力加速度（均方根值）的振动环境中工作的液体和悬浮推进剂控制系统及为此专门设计的部件
Liquid and slurry propellant control systems, and specially designed components thereof, designed or modified to operate in vibration environments of more than 10 g (RMS) between 20 Hz and 2,000 Hz:
1、绝压等于或大于7000千帕时流量等于或大于24升/分和作动器响应时间小于100微秒的伺服阀
Servo valves designed for flow rates of 24 liters per minute or greater, at an absolute pressure of 7,000 kPa or greater, that have an actuator response time of less than 100 microseconds;
2、用于液体推进剂的、转速等于或大于8000转/分，并且出口压力等于或大于7000千帕的泵
Pumps, for liquid propellants, with shaft speeds equal to or greater than 8,000 RPM or with discharge pressures equal to or greater than 7,000 kPa
（十）为上述第（一）至第（九）项专门设计的生产设施
Production facilities specially designed for the above Subitems (1) to (9)
三、液体推进剂
Liquid Propellants
（一）纯度70%以上的肼
Hydrazine with a concentration of more than 70 percent;
（二）偏二甲肼
Unsymmetric dimethylhydrazine (UDMH);
（三）甲基肼
Monomethylhydrazine (MMH);
（四）混胺
Mixed amine;
（五）四氧化二氮
Dinitrogen tetroxide;
（六）红发烟硝酸
Red Fuming Nitric Acid
四、固体推进剂及其组分
Solid Propellant and Propellant Constituents
（一）颗粒尺寸小于500微米、不论球形的、椭球体的、雾化的、片状的或研碎的金属燃料，含下述任何金属或其合金，含量等于或大于97%：
Metal fuels with particle sizes less than 500 mm, whether spherical, atomized, spheroidal, flaked or ground, consisting of 97 percent by weight or greater of any of the following metal and alloys of these:
1、锆
Zirconium;
2、硼
Boron;
3、镁
Magnesium;
4、钛
Titanium;
5、铀
Uranium;
6、钨
Tungsten;
7、锌
Zinc;
8、铈
Cerium
（二）粒度小于500微米的球形高氯酸铵（过氯酸铵）
Ammonium perchlorate with particle sizes less than 500 mm;
（三）同时满足如下条件的球形铝粉：
Spherical aluminum powder meeting the following requirements:
1、颗粒均匀
With particle of uniform diameter;
2、铝含量等于或大于97%（按重量计）
With aluminum content of 97 percent or greater;
3、粒度小于500微米
With diameter of less than 500 mm
（四）能量密度大于40兆焦耳/千克的硼浆
Boron Slurry, having an energy density of more than 40 x 106 J/kg;
（五）硝胺类
Nitro-amines:
1、奥托金（环四甲基四硝胺HMX）
Cyclotetramethylene-tetranitramene (HMX);
2、黑索金（环三甲基三硝胺RDX）
Cyclotrimethylene-trinitramine (RDX)
（六）复合推进剂
Composite Propellants:
1、模压的胶质推进剂
Molded colloid propellants;
2、含有硝化粘接剂和5%以上的铝粉的推进剂
Propellant including nitrate bonding agents and with an aluminum (particle) content of 5 percent or greater
（七）聚合物
Polymeric substances:
1、端羧基聚丁二烯（CTPB）
Carboxl-terminated polybutadiene (CTPB);
2、端羟基聚丁二烯（HTPB）
Hydroxy-terminated polybutadiene (HTPB)
（八）三乙胺点火剂
Triethylamine as an igniting agent
五、制导、控制系统设备、部件及相关技术
Guidance and Control Set, Components and Related Technologies
（一）天文陀螺罗盘及其他利用天体或卫星进行导航的装置
Gyro-astro compasses and other devices which derive position or orientation by means of automatically tracking celestrial bodies or satellites;
（二）飞行控制软件和测试软件
Flight control software and related test software;
（三）陀螺稳定平台
Gyro stability platform;
（四）无人航空飞行器的自动驾驶仪
Automatic pilots for UAV;
（五）额定漂移率小于0.5度/小时的陀螺仪
Gyros with a rated drift rate stability of less than 0.5 degree per hour;
（六）惯性平台测试台（包括高精度离心机和转台）
Test table for inertial platform (including high-accuracy centrifuges and rotating table);
（七）惯性测量单元测试仪
Inertial Measurement Unit (IMU) tester;
（八）惯性测量单元稳定元件加工夹具
Inertial Measurement Unit (IMU) stable element handling fixture;
（九）惯性平台平衡夹具
Inertial Measurement Unit (IMU) platform balance fixture;
（十）陀螺调谐测试仪
Tester for gyro tuning;
（十一）陀螺动态平衡测试仪
Tester for gyro dynamic balance;
（十二）陀螺/马达运转试验台
Gyro run-in/motor test station;
（十三）陀螺抽气和充气台
Gyro evacuation and filling station;
（十四）陀螺轴承用的离心架
Centrifuge fixture for gyro bearings;
（十五）生产环形激光陀螺用的矩形散射仪
Rectangular scatterometer for ring laser gyro production;
（十六）生产环形激光陀螺用的极性散射仪
Polarity scatterometer for ring laser gyro production;
（十七）生产环形激光陀螺用的反射计
Reflectometer for ring laser gyro production;
（十八）生产环形激光陀螺用的表面光度仪
Surface profilometer for ring laser gyro production;
（十九）比例误差小于0.25%的加速度表
Accelerometers with a proportional error of 0.25 percent or less;
（二十）加速度表测试台
Accelerometer test station;
（二十一）加速度表轴线校准台
Accelerometer axis align station;
（二十二）为陀螺或加速度表专门设计的试验、标定和校准装置
Specially designed test, calibration, and alignment equipment for gyro or accelerometer
六、目标探测装置及电子系统
Target Detection System and Related Electronics
（一）雷达设备
Radar systems;
（二）高度表
Altimeters;
（三）地形等高线绘制设备
Terrain contour mapping equipment;
（四）场景绘图及相关设备（包括数字和模拟设备）
Scene mapping and correlation (both digital and analog) equipment;
（五）成像传感器设备
Imaging sensor equipment;
（六）专门设计的导航信息处理机及其软件
Processors and software specially designed for processing navigation information;
（七）排除传导热的电子装置和部件
Electronic devices and components removed of conductive heat;
（八）抗辐射加固的电子装置和部件
Radiation-hardened electronic devices and components;
（九）能可靠地在超过125摄氏度温度下短期工作的电子装置和部件
Electronic assemblies and components operating at temperatures in excess of 125 °C for a short period of time;
（十）具有专门设计的整体结构支承件的电子装置和部件
Electronic devices and components with specially designed integrated support;
（十一）遥测设备及其技术
Telemetry equipment and related technologies;
（十二）遥测或遥控的地面设备
Telemetering and telecontrol ground equipment;
（十三）满足如下条件的模拟和数字计算装置：
Analogue computers and digital computers having either of the following characteristics:
1、连续工作时的环境温度范围为-45摄氏度至+55摄氏度；或
Rated for continuous operation at temperatures from below minus 45 °C to above plus 55 °C;
2、进行了加固和抗辐射加固的
Designed as ruggedized or radiation hardened
（十四）具有以下特性之一的模/数转换器：
Analogue-to-digital converter having one of the following characteristics:
1、能在-54摄氏度至+125摄氏度的温度范围内连续工作，并且
Rated for operation at temperatures from below minus 54 °C to above plus 125 °C, and
2、能设计成符合加固设备的军用技术规范；或
Designed to meet military specifications for ruggedized equipment; or
3、能设计或改进成军用，或设计成抗辐射的，并具有如下特性之一：
Designed or modified for military use or designed as radiation hardened, and having one of the following characteristics:
（1）在额定精度下转换速率大于每秒200000次完整的转换
Converting at a rate of over 200000 times (complete conversion) per second under rated accuracy;
（2）在规定的工作温度范围内精度超过全量程的1/10000以上
With accuracy exceeding 1/10000 of the whole range in the rated temperature scope;
（3）品质因数为1×108以上（每秒转换次数除以精度）
With quality factor of over 1′108 (complete conversion times per second divided by accuracy);
（4）内含的模数转换器微型电路具有下列特性：
The inbuilt microcircuits having the following characteristics:
①达到最大分辨率时的最长转换时间小于20微秒
The maximum converting time is less than 20 microseconds under maximum resolution, and
②在规定的工作温度范围内，额定的非线性度高于全量程的0.025%
The rated nonlinearity is better than 0.025 percent of the range in rated temperature scope
（十五）保护电子设备和电气系统免受外部电磁脉冲和电磁干扰危害的设计技术
Design technology for protection of avionics and electrical subsystems against electromagnetic pulse and electromagnetic interference hazards from external sources:
1、屏蔽系统的设计技术
Design technology for shielding systems;
2、加固的电气线路和分系统的线路设计技术
Design technology for the configuration of hardened electrical circuits and subsystems;
3、上述加固标准的确定
Determination of hardening criteria for the above
七、材料
Material
（一）结构复合材料，包括各种复合材料结构件、层压板和制品，以及以树脂或金属为基体的用纤维和丝材增强而制成的各种预浸件和预成形件，其中增强材料的比拉伸强度大于7.62×104米和比模量大于3.18×106米
Structural composites, including composite structures, laminates, and manufactures thereof, and resin impregnated fibre prepregs and metal coated fibre preforms therefor, made with either organic matrix or metal matrix utilizing fibrous or filamentary reinforcements having a specific tensile strength greater than 7.62 x 104 m and a specific modulus greater than 3.18 x 106 m:
1、聚酰亚胺复合材料
Polyimide composite;
2、聚酰胺基复合材料
Polyamide composite;
3、聚碳酸脂复合材料
Polycarbonate composite;
4、石英纤维增强的复合材料
Quartz-fibre-reinforced composite;
5、碳纤维增强的复合材料
Carbon-fibre-reinforced composite;
6、硼纤维增强的复合材料
Boron-fibre-reinforced composite;
7、镁金属基复合材料
Magnesium matrix composite;
8、钛金属基复合材料
Titanium matrix composite
（二）在100赫兹至10000赫兹的频率下，介电常数小于6的陶瓷复合材料
Ceramic composite materials with dielectric constant less than 6 at frequencies from 100 Hz to 10,000 MHz;
（三）在20摄氏度温度下测得具有下列特性的人造细晶粒整体石墨
Fine grain bulk artificial graphites having the following features measured at 20 °C:
1、密度大于1.72克/立方厘米
With a bulk density of at least 1.72 g/cm3;
2、拉伸断裂应变等于或大于0.7%
With a tension rupture strain of at least 0.7 percent;
3、热膨胀系数等于或小于2.75×10-6/摄氏度（在20摄氏度至982摄氏度温度范围内测得）
With a heat expansion coefficient of at least 2.75′10-6 (measured at temperatures from 20 °C to 982 °C)
（四）多次浸渍的热解碳/碳材料
Resaturated pyrolized carbon-carbon materials;
（五）特种钢材
Special Steel:
具有以下特性的钛稳定的双炼不锈钢：
Titanium-stabilized duplex stainless steel (Ti-DSS) having the following characteristics:
1、含17.0%至26.5%（重量）的铬和4.5%至7.0%（重量）的镍，并具有
Containing 17.0 to 26.5 weight percent chromium and 4.5 to 7.0 weight percent nickel;
2、铁素体-奥氏体微观结构（亦称"两相"微观结构），其中奥氏体的体积百分比最少为10%
Having a ferritic-austenitic microstructure (also referred to as a two-phase microstructure) of which at least 10 percent is austenite by volume;
3、具有以下任何形状：
Having any of the following forms:
（1）每一维的尺寸为100毫米或100毫米以上的锭材或棒材
Ingots or bars having a size of 100 mm or more in each dimension;
（2）宽度等于或大于600毫米和厚度等于或小于3毫米的薄板
Sheets having a width of 600 mm or more and a thickness of 3 mm or less;
（3）外径等于或大于600毫米和壁厚等于或小于3毫米的管材
Tubes having an outer diameter of 600 mm or more and a wall thickness of 3 mm or less
（六）陶瓷防热材料
Ceramic heat shielding material;
（七）烧蚀防热材料
Ablative heat shielding material
八、导弹、火箭相关设计和试验技术及设备
Design and Test Equipment and Technologies Related to Ballistic Missiles and Rockets
（一）系统建模、仿真或总体设计的专用软件及相关模拟和数字计算机
Specially designed software, or analogue and digital computers thereof, for modeling, simulation, or design integration of the systems;
（二）能够施加等于或大于100千牛顿的力并且使用数控技术的振动试验设备，以及专门为此设计的辅助设备和软件
Vibration test systems capable of providing a force of 100kN or more and incorporating a digital controller, as well as specially designed vibration test auxiliaries and software;
（三）超音速（马赫数为1.4至5）和高超音速（马赫数为5至15）的风洞，但专门设计用于教学目的和试验区的尺寸（在内部测得的）小于25厘米的风洞除外
Wind-tunnel for supersonic (Mach 1.4 to 5) or hypersonic (Mach 5 to 15) speeds except those specially designed for teaching and those with the test area dimensions smaller than 25 cm (measured internally);
（四）能够试验推力大于90千牛顿的固体或液体推进剂火箭发动机或者能同时测量三个推力分量的试车台
Test benches which have the capacity to handle solid or liquid propellant rocket motors of more than 90 kN of thrust, or which are capable of simultaneously measuring the three axial thrust components
九、生产设备和生产技术
Production Equipment and Production Technology
（一）生产第二部分第四项所述固体推进剂的设备
Equipment for production of solid propellants listed in Item 4 of Part II:
1、同时满足如下条件的间歇式搅拌机：
Batch mixers having:
（1）总容量大于110升
A total volumetric capacity of 110 litres or more; and
（2）至少装有一个偏离中心的搅拌轴
At least one mixing/kneading shaft mounted off centre
2、同时满足如下条件的连续式搅拌机：
Continuous mixers having:
（1）具有两个或更多个搅拌轴
Two or more mixing/kneading shafts; and
（2）具有能够打开的搅拌室
Capability to open the mixing chamber
3、在受控环境中生产雾化的或球状的金属粉末的设备
Equipment for the production of atomized or spherical metallic powder in a controlled environment;
4、流体能粉碎机
Fluid energy mills;
5、生产固体推进剂用的贮运设备
Handling equipment for production of solid propellant;
6、生产固体推进剂用的固化设备
Curing equipment for production of solid propellant;
7、生产固体推进剂用的浇注设备
Casting equipment for production of solid propellant;
8、生产固体推进剂用的压制设备
Pressing equipment for production of solid propellant;
9、生产固体推进剂用的验收试验设备
Acceptance testing equipment for production of solid propellant;
10、生产固体推进剂用的机加工设备
Machining equipment for production of solid propellant;
11、生产固体推进剂用的拉挤设备
Extruding equipment for production of solid propellant
（二）生产第二部分第三项中所述液体推进剂的设备
Equipment for producing liquid propellant in Item 3 of Part II:
1、生产液体推进剂用的贮运设备
Handling equipment for production of liquid propellant;
2、液体推进剂的生产设备
Production equipment for liquid propellant;
3、生产液体推进剂用的验收试验设备
Acceptance testing equipment for production of liquid propellant
（三）热解沉积和增密的设备与技术
Pyrolytic deposition and densification equipment and technology
1、在注模、芯模或其他基料上用母质气体在1300摄氏度到2900摄氏度高温范围内和130帕到20千帕的压力下分解而产生出热解衍生材料的生产技术，包括母质气体的合成、流量、工艺过程控制的规程以及参数控制的技术在内
Technology for producing pyrolytically derived materials formed on a mould, mandrel or other substrate from precursor gases which decompose at temperatures from 1,300 °C to 2,900 °C and at pressures of 130 Pa to 20 kPa, including technology for the composition of precursor gases, flow-rates and process control schedules and parameters;
2、为上述工艺过程而专门设计的喷嘴
Specially designed nozzles for the above processes;
3、满足如下条件的等静压机：
Isostatic presses having all of the following characteristics:
（1）最大工作压力等于或大于69兆帕
Maximum working pressure of 69 MPa or greater;
（2）能够达到并保持等于或高于600 摄氏度的可控热环境
Designed to achieve and maintain a controlled thermal environment of 600 °C or greater, and
（3）具有内径等于或大于254毫米的空腔
Possessing a chamber cavity with an inside diameter of 254 mm or greater
4、用于碳碳复合材料增密的化学气相沉积炉
Chemical vapor deposition furnaces for the densification of carbon-carbon composites;
5、热解沉积和增密工艺过程控制装置及专门设计的软件
Pyrolytic deposition and densification process controls equipment and specially designed software therefor
（四）生产复合材料部件的设备和技术
Equipment and technology for production of composite component:
1、三坐标或多坐标联动和程控的纤维缠绕机及为其专门设计的计算机或数控软件
Filament winding machines coordinated and programmed in three or more axes, and specially designed computers and software thereof;
2、具有两个或两个以上坐标的数控和程控的铺带机及为其专门设计的软件
Tape-laying machines coordinated and programmed in two or more axes, and specially designed software thereof;
3、纤维结构复合材料编织机的成套附件及其改装附件
Adapters and modification kits of weaving machines for fibre structure composites;
4、调节热压罐和液压釜中温度、压力和大气的技术资料和规程
Technical data and procedures for the regulation of temperature, pressures or atmosphere in autoclaves or hydroclaves;
5、生产聚合纤维（如聚丙烯腈、粘胶和聚碳硅烷）的设备，包括在加热过程中对纤维施加张力的专门设备
Equipment for converting polymeric fibres (such as polyacrylonitrile, rayon or polycarbosilane) including special provision to strain the fibre during heating;
6、用于使元素和化合物气相沉积在被加热的纤维基体上的设备
Equipment for the vapor deposition of elements or compounds on heated filament substrates;
7、难熔陶瓷（如氧化铝）湿纺设备
Equipment for the wet-spinning of refractory ceramics (such as aluminium oxide);
8、对纤维表面进行特殊处理的设备
Equipment for special fibre surface treatment;
9、用于生产预浸件和预成型件的设备
Equipment for producing prepregs and preforms;
10、用于复合材料结构件、层压板材和制品的预成型件加压、固化、浇注、热压或粘接的注模、芯模、压模和工装夹具等
Moulds, mandrels, dies, fixtures and tooling for the preform pressing, curing, casting, sintering or bonding of composite structures, laminates and manufactures thereof
评论
目前还没有任何评论
登录后才可评论.
